OnAir

Decode S-band CCSDS with an SDR

S-band CCSDS: satellite table, frames (needs a tracking dish).

In the mode list
S-band CCSDS satellites

What S-band CCSDS is

S-band and L-band CCSDS downlinks: pick the satellite from the table (Jason-3, CloudSat, FORMOSAT, Hinode, SMAP, Falcon 9, Starship, Crew Dragon and many others), tuning and frame format are set for you. Frames, virtual channels and spacecraft IDs; Needs a tracking S-band dish.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is S-band CCSDS satellites.

What OnAir shows

S-band and L-band CCSDS downlinks: pick the satellite from the table (Jason-3, CloudSat, FORMOSAT, Hinode, SMAP, Falcon 9, Starship, Crew Dragon and many others), tuning and frame format are set for you. Frames, virtual channels and spacecraft IDs; Needs a tracking S-band dish.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving these signals is legal in most countries. OnAir is a receiver. See also Legal.

Questions about S-band CCSDS

Can I decode S-band CCSDS with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive S-band CCSDS?

Receiving these signals is legal in most countries. OnAir is a receiver.

Can I try S-band CCSDS in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.