Decode GCOM-C1 with an SDR
GCOM-C1: X-band direct downlink, needs a dish; recordings.
- Group
- Weather & science
- In the mode list
- GCOM-C1
- GitHub wiki
- Mode-GCOM-C1
What GCOM-C1 is
GCOM-C1 X-band link: OQPSK 69.4 Msym/s, uncoded CADUs, frame counts only. Needs a tracking X-band dish, a down-converter and 75 Msps or more. A recording is the usual way to use it.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GCOM-C1.
What OnAir shows
GCOM-C1 X-band link: OQPSK 69.4 Msym/s, uncoded CADUs, frame counts only. Needs a tracking X-band dish, a down-converter and 75 Msps or more. A recording is the usual way to use it.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about GCOM-C1
Can I decode GCOM-C1 with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive GCOM-C1?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try GCOM-C1 in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.