Decode MSG Raw Data with an SDR
MSG Raw Data: SEVIRI discs from Meteosat at 1686.83 MHz (needs a dish).
- Group
- Weather & science
- In the mode list
- Meteosat SEVIRI raw, 1.7 GHz
- GitHub wiki
- Mode-MSG Raw Data
What MSG Raw Data is
Meteosat Second Generation raw downlink on 1686.83 MHz: QPSK 3.75 Msym/s, CCSDS convolutional code, Reed-Solomon interleave 5, the SEVIRI disc line by line (11 channels and HRV, reduced to fit memory, saved when the disc ends every 15 minutes). Needs a fixed dish of about 1.2 m or more at 1.7 GHz with an LNA and 6 Msps. Receive only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Meteosat SEVIRI raw, 1.7 GHz.
What OnAir shows
Meteosat Second Generation raw downlink on 1686.83 MHz: QPSK 3.75 Msym/s, CCSDS convolutional code, Reed-Solomon interleave 5, the SEVIRI disc line by line (11 channels and HRV, reduced to fit memory, saved when the disc ends every 15 minutes). Needs a fixed dish of about 1.2 m or more at 1.7 GHz with an LNA and 6 Msps. Receive only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about MSG Raw Data
Can I decode MSG Raw Data with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive MSG Raw Data?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try MSG Raw Data in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.