OnAir

Decode GK-2A UHRIT with an SDR

GK-2A UHRIT: xRIT files at X-band (dish, 28 Msps).

In the mode list
GK-2A UHRIT, X-band
GitHub wiki
Mode-GK-2A UHRIT

What GK-2A UHRIT is

GK-2A UHRIT on 8070 MHz: DVB-S2, 15.6 Msym/s, CADUs with xRIT files. Needs an X-band dish, a down-converter and about 28 Msps or more; recordings work.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GK-2A UHRIT, X-band.

What OnAir shows

GK-2A UHRIT on 8070 MHz: DVB-S2, 15.6 Msym/s, CADUs with xRIT files. Needs an X-band dish, a down-converter and about 28 Msps or more; recordings work.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving these signals is legal in most countries. OnAir is a receiver. See also Legal.

Questions about GK-2A UHRIT

Can I decode GK-2A UHRIT with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive GK-2A UHRIT?

Receiving these signals is legal in most countries. OnAir is a receiver.

Can I try GK-2A UHRIT in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.