OnAir

Decode STEREO high rate with an SDR

STEREO high rate: satellite direct downlink, needs a dish; recordings.

In the mode list
STEREO high rate

What STEREO high rate is

STEREO A/B high rate on 8443.52 MHz: BPSK 1.44 Msym/s, frame counts from .cadu files. The CCSDS turbo code from raw IQ and the ICER images are not decoded. Needs a large tracking dish (deep space). A recording is the usual way to use it.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is STEREO high rate.

What OnAir shows

STEREO A/B high rate on 8443.52 MHz: BPSK 1.44 Msym/s, frame counts from .cadu files. The CCSDS turbo code from raw IQ and the ICER images are not decoded. Needs a large tracking dish (deep space). A recording is the usual way to use it.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving these signals is legal in most countries. OnAir is a receiver. See also Legal.

Questions about STEREO high rate

Can I decode STEREO high rate with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive STEREO high rate?

Receiving these signals is legal in most countries. OnAir is a receiver.

Can I try STEREO high rate in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.