Decode FY-3 MPT with an SDR
FY-3 MPT: Fengyun-3 MERSI pictures in X-band (needs a dish, a down-converter and a very fast radio).
- Group
- Weather & science
- In the mode list
- Fengyun-3 MERSI, X-band
- GitHub wiki
- Mode-FY-3 MPT
What FY-3 MPT is
FY-3 MPT, the medium rate picture transmission of FY-3A, FY-3B and FY-3C (X-band 7750 / 7780 MHz, QPSK 18.7 Msym/s): the MERSI pictures, 250 m channels on the 1 km grid. Needs a dish with an X-band feed, a down-converter and a radio that samples 28 Msps or more (20 Msps gives a reduced result).
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Fengyun-3 MERSI, X-band.
What OnAir shows
FY-3 MPT, the medium rate picture transmission of FY-3A, FY-3B and FY-3C (X-band 7750 / 7780 MHz, QPSK 18.7 Msym/s): the MERSI pictures, 250 m channels on the 1 km grid. Needs a dish with an X-band feed, a down-converter and a radio that samples 28 Msps or more (20 Msps gives a reduced result).
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about FY-3 MPT
Can I decode FY-3 MPT with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive FY-3 MPT?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try FY-3 MPT in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.