Decode GK-2A CDAS with an SDR
GK-2A CDAS: frames (needs a dish, 8 Msps).
- Group
- Weather & science
- In the mode list
- GK-2A CDAS frames
- GitHub wiki
- Mode-GK-2A CDAS
What GK-2A CDAS is
GK-2A CDAS service: QPSK 3.096 Msym/s, CCSDS frames with Reed-Solomon, frame log and virtual channels. Needs a dish and 8 Msps.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GK-2A CDAS frames.
What OnAir shows
GK-2A CDAS service: QPSK 3.096 Msym/s, CCSDS frames with Reed-Solomon, frame log and virtual channels. Needs a dish and 8 Msps.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about GK-2A CDAS
Can I decode GK-2A CDAS with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive GK-2A CDAS?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try GK-2A CDAS in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.