OnAir

Decode GOES GRB with an SDR

GOES GRB: ABI / SUVI / GLM rebroadcast (needs a dish, 12 Msps).

In the mode list
GOES GRB pictures, 1.7 GHz
GitHub wiki
Mode-GOES GRB

What GOES GRB is

GOES-R series GRB on 1686.6 MHz: DVB-S2, 8.67 Msym/s, CADUs with ABI pictures (JPEG 2000), SUVI, GLM and metadata. Needs an L-band dish and 12 Msps or more.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GOES GRB pictures, 1.7 GHz.

What OnAir shows

GOES-R series GRB on 1686.6 MHz: DVB-S2, 8.67 Msym/s, CADUs with ABI pictures (JPEG 2000), SUVI, GLM and metadata. Needs an L-band dish and 12 Msps or more.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.

Receiving and the law

Receiving and the law. Receiving these signals is legal in most countries. OnAir is a receiver. See also Legal.

Questions about GOES GRB

Can I decode GOES GRB with an RTL-SDR?

Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.

Is it legal to receive GOES GRB?

Receiving these signals is legal in most countries. OnAir is a receiver.

Can I try GOES GRB in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.