Decode GOES MDL with an SDR
GOES MDL: multi-use data link frames (needs a dish).
- Group
- Weather & science
- In the mode list
- GOES MDL frames
- GitHub wiki
- Mode-GOES MDL
What GOES MDL is
GOES-N MDL (multi-use data link) on 1681.5 MHz: QPSK 200 ksym/s, 464-byte frames in a frame log.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GOES MDL frames.
What OnAir shows
GOES-N MDL (multi-use data link) on 1681.5 MHz: QPSK 200 ksym/s, 464-byte frames in a frame log.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about GOES MDL
Can I decode GOES MDL with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive GOES MDL?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try GOES MDL in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.