Decode Riometer with an SDR
Riometer: ionospheric absorption from the cosmic noise level, receive only.
- Group
- Weather & science
- In the mode list
- Cosmic noise, 30 MHz
- GitHub wiki
- Mode-Riometer
What Riometer is
Riometer: cosmic radio noise near 30 MHz measured with interference rejected, compared with a quiet-day curve per sidereal hour, so that ionospheric absorption (a geomagnetic or particle event) shows in dB. Needs a fixed-gain receiver, an antenna looking up and one to two days to build the curve.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Cosmic noise, 30 MHz.
What OnAir shows
Riometer: cosmic radio noise near 30 MHz measured with interference rejected, compared with a quiet-day curve per sidereal hour, so that ionospheric absorption (a geomagnetic or particle event) shows in dB. Needs a fixed-gain receiver, an antenna looking up and one to two days to build the curve.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Riometer
Can I decode Riometer with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Riometer?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try Riometer in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.