Decode GeoNetCast with an SDR
GeoNetCast: weather product files by C-band DVB-S2 (needs a dish and 52 Msps).
- Group
- Weather & science
- In the mode list
- GeoNetCast files, C-band
- GitHub wiki
- Mode-GeoNetCast
What GeoNetCast is
GeoNetCast Americas file broadcast, C-band 4080 MHz (1070 MHz after a 5150 MHz LNB): DVB-S2 8PSK 5/6 at 30 Msym/s, IP over MPE on PID 4201, Fazzt files, saved as they come (satellite pictures and weather products in their own formats). Needs a C-band dish and 52 Msps or more, so most radios can only play a recording. Receive only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is GeoNetCast files, C-band.
What OnAir shows
GeoNetCast Americas file broadcast, C-band 4080 MHz (1070 MHz after a 5150 MHz LNB): DVB-S2 8PSK 5/6 at 30 Msym/s, IP over MPE on PID 4201, Fazzt files, saved as they come (satellite pictures and weather products in their own formats). Needs a C-band dish and 52 Msps or more, so most radios can only play a recording. Receive only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about GeoNetCast
Can I decode GeoNetCast with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive GeoNetCast?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try GeoNetCast in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.