Decode Landsat 8/9 S-band with an SDR
Landsat 8/9 S-band: satellite direct downlink, needs a dish; recordings.
- Group
- Weather & science
- In the mode list
- Landsat 8/9 S-band
- GitHub wiki
- Mode-Landsat 8/9 S-band
What Landsat 8/9 S-band is
Landsat 8 and 9 S-band link: OQPSK 1.067 Msym/s, K=7 r=1/2, CADU frames. Needs a tracking S-band dish and 2 Msps. A recording is the usual way to use it.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Landsat 8/9 S-band.
What OnAir shows
Landsat 8 and 9 S-band link: OQPSK 1.067 Msym/s, K=7 r=1/2, CADU frames. Needs a tracking S-band dish and 2 Msps. A recording is the usual way to use it.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Landsat 8/9 S-band
Can I decode Landsat 8/9 S-band with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Landsat 8/9 S-band?
Receiving these signals is legal in most countries. OnAir is a receiver.
Can I try Landsat 8/9 S-band in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.