OnAir

Decode GRAVES meteor echoes with an SDR

GRAVES: meteor echo list.

In the mode list
Meteor echoes

What GRAVES meteor echoes is

The GRAVES space radar's carrier on 143.050 MHz and the meteor echoes around it: Doppler shift, strength, duration and drift of every echo. Needs a steady radio and a narrow channel. Simulated signals only.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Meteor echoes.

What OnAir shows

The GRAVES space radar's carrier on 143.050 MHz and the meteor echoes around it: Doppler shift, strength, duration and drift of every echo. Needs a steady radio and a narrow channel. Simulated signals only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving these signals is legal in most countries. OnAir is a receiver. See also Legal.

Questions about GRAVES meteor echoes

Can I decode GRAVES meteor echoes with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive GRAVES meteor echoes?

Receiving these signals is legal in most countries. OnAir is a receiver.

Can I try GRAVES meteor echoes in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.