Decode Geoscan with an SDR
Geoscan cubesats: 9k6 FSK frames on 70 cm.
- In the mode list
- Geoscan cubesats
- GitHub wiki
- Mode-Geoscan
What Geoscan is
Geoscan cubesats on 70 cm (StratoSat-TK1, RTU-MIREA1, TUSUR-GO, VIZARD-ION, COLIBRI-S, HORIZON): 9600 bit/s FSK, 66-byte frames with CRC. A 70 cm Yagi or vertical works during a pass.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Geoscan cubesats.
What OnAir shows
Geoscan cubesats on 70 cm (StratoSat-TK1, RTU-MIREA1, TUSUR-GO, VIZARD-ION, COLIBRI-S, HORIZON): 9600 bit/s FSK, 66-byte frames with CRC. A 70 cm Yagi or vertical works during a pass.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Geoscan
Can I decode Geoscan with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Geoscan?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try Geoscan in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.