Decode NOAA DSB with an SDR
NOAA DSB: TIP telemetry and HIRS at 137 MHz (retired 2025, recordings).
- In the mode list
- NOAA DSB / TIP (recordings)
- GitHub wiki
- Mode-NOAA DSB
What NOAA DSB is
NOAA DSB on 137.35 / 137.77 MHz: PM, Manchester 8320 bit/s, 104-byte TIP minor frames, spacecraft ID, HIRS picture. NOAA-15, -18 and -19 stopped transmitting in 2025, so this mode is for recordings.
Frequencies and settings
Aircraft transponders, 1090 MHz.
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is NOAA DSB / TIP (recordings).
What OnAir shows
Aircraft on a map, with altitude, speed and callsign; units switch between aviation (kt, ft, nm, ft/min) and metric (km/h or m/s, m, km, m/s) in the table, details, map labels and CSV export (SBS and feeds stay in aviation units).
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about NOAA DSB
Can I decode NOAA DSB with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive NOAA DSB?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try NOAA DSB in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.