OnAir

Decode Tiantong signalling with an SDR

Tiantong activity, no decoding.

In the mode list
Satellite carriers

What Tiantong signalling is

Chinese S-band mobile satellite 2170 - 2200 MHz. No public air interface: channel energy only.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellite carriers.

What OnAir shows

Chinese S-band mobile satellite 2170 - 2200 MHz. No public air interface: channel energy only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.

Receiving and the law

Receiving and the law. Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir. See also Legal.

Questions about Tiantong signalling

Can I decode Tiantong signalling with an RTL-SDR?

Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.

Is it legal to receive Tiantong signalling?

Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.

Can I try Tiantong signalling in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.