Decode Thuraya GMR-1 channels with an SDR
Active Thuraya channels, detection only.
- In the mode list
- Satellite carriers
- GitHub wiki
- Mode-Thuraya GMR-1 channels
What Thuraya GMR-1 channels is
Thuraya GMR-1 satellite phone downlink 1525 - 1559 MHz: active 31.25 kHz channels. No decoder is implemented.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellite carriers.
What OnAir shows
Thuraya GMR-1 satellite phone downlink 1525 - 1559 MHz: active 31.25 kHz channels. No decoder is implemented.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about Thuraya GMR-1 channels
Can I decode Thuraya GMR-1 channels with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive Thuraya GMR-1 channels?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try Thuraya GMR-1 channels in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.