Decode BEESAT / Mobitex with an SDR
BEESAT (Mobitex): satellite frames from TU Berlin cubesats.
- In the mode list
- Satellites, BEESAT / Mobitex
- GitHub wiki
- Mode-BEESAT / Mobitex
What BEESAT / Mobitex is
BEESAT-1 / BEESAT-9 and other TU Berlin and TECHNOSAT cubesats on 70 cm: Mobitex-NX blocks with Mobitex CRCs at 4800 bit/s GMSK. The CubeSat telemetry decoder showing this framing only (it also runs inside CubeSat telemetry).
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellites, BEESAT / Mobitex.
What OnAir shows
BEESAT-1 / BEESAT-9 and other TU Berlin and TECHNOSAT cubesats on 70 cm: Mobitex-NX blocks with Mobitex CRCs at 4800 bit/s GMSK. The CubeSat telemetry decoder showing this framing only (it also runs inside CubeSat telemetry).
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about BEESAT / Mobitex
Can I decode BEESAT / Mobitex with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive BEESAT / Mobitex?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try BEESAT / Mobitex in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.