Decode FY-4A HRIT-II/III with an SDR
FY-4A HRIT: full-resolution geostationary pictures from FengYun-4A (needs a dish and an LNA).
- In the mode list
- Weather images, 1679 MHz
- GitHub wiki
- Mode-FY-4A HRIT-II/III
What FY-4A HRIT-II/III is
FengYun-4A HRIT-II/III on 1679 MHz: DVB-S2 QPSK 5/6 at 1 Msym/s carrying CCSDS xRIT files, the full-resolution AGRI pictures per channel and region (JPEG 2000). Needs a dish (about 1.2 m or more) with an LNA and filter. Receive only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Weather images, 1679 MHz.
What OnAir shows
FengYun-4A HRIT-II/III on 1679 MHz: DVB-S2 QPSK 5/6 at 1 Msym/s carrying CCSDS xRIT files, the full-resolution AGRI pictures per channel and region (JPEG 2000). Needs a dish (about 1.2 m or more) with an LNA and filter. Receive only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about FY-4A HRIT-II/III
Can I decode FY-4A HRIT-II/III with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive FY-4A HRIT-II/III?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try FY-4A HRIT-II/III in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.