Decode GK-2A HRIT with an SDR
GK-2A HRIT: Korean geostationary weather pictures, 3 Msym/s QPSK (needs a dish, an LNA and a fast radio).
- In the mode list
- Weather images, 1695.4 MHz
- GitHub wiki
- Mode-GK-2A HRIT
What GK-2A HRIT is
GK-2A (GEO-KOMPSAT-2A, Korea, 128.2°E) HRIT on 1695.4 MHz: QPSK at 3 Msym/s (3 Mbit/s of frames), rate 1/2 Viterbi, Reed-Solomon (255,223), CCSDS frames, xRIT files with the 16-channel full-disk pictures (JPEG 2000, assembled from their segments). KMA encrypts the pictures with DES: import your KMA key file to see them (none are built in); the .lrit files are saved either way. Needs a dish with….
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Weather images, 1695.4 MHz.
What OnAir shows
GK-2A (GEO-KOMPSAT-2A, Korea, 128.2°E) HRIT on 1695.4 MHz: QPSK at 3 Msym/s (3 Mbit/s of frames), rate 1/2 Viterbi, Reed-Solomon (255,223), CCSDS frames, xRIT files with the 16-channel full-disk pictures (JPEG 2000, assembled from their segments). KMA encrypts the pictures with DES: import your KMA key file to see them (none are built in); the .lrit files are saved either way. Needs a dish with an LNA, a radio that runs 6.4 Msps or more and GK-2A above your horizon. Receive only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about GK-2A HRIT
Can I decode GK-2A HRIT with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive GK-2A HRIT?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try GK-2A HRIT in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.