OnAir

Decode Starlink detector with an SDR

Starlink frame detection, no decoding.

In the mode list
Satellite carriers

What Starlink detector is

Detects Starlink's Ku-band downlink by its 750 Hz frame gap (published reverse engineering; no public specification). Needs an LNB and a dish.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellite carriers.

What OnAir shows

Detects Starlink's Ku-band downlink by its 750 Hz frame gap (published reverse engineering; no public specification). Needs an LNB and a dish.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir. See also Legal.

Questions about Starlink detector

Can I decode Starlink detector with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive Starlink detector?

Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.

Can I try Starlink detector in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.