Decode Fleet Broadcast (UHF SATCOM) with an SDR
Fleet Broadcast: 16 x 75 Bd UHF SATCOM multiplex, framing and channel activity (receive only, nothing decoded).
- In the mode list
- 16 channel SATCOM multiplex
- GitHub wiki
- Mode-Fleet Broadcast (UHF SATCOM)
What Fleet Broadcast (UHF SATCOM) is
Fleet Broadcast on 250.450 / 250.550 / 250.650 MHz: a 16 channel, 75 Bd multiplex from UHF military satellites (1200 Bd differential BPSK). Finds the carrier, the clock and the frame and shows what each channel looks like. The channels are usually encrypted-looking data: nothing is decoded or decrypted. Receive only; simulated signals only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is 16 channel SATCOM multiplex.
What OnAir shows
Fleet Broadcast on 250.450 / 250.550 / 250.650 MHz: a 16 channel, 75 Bd multiplex from UHF military satellites (1200 Bd differential BPSK). Finds the carrier, the clock and the frame and shows what each channel looks like. The channels are usually encrypted-looking data: nothing is decoded or decrypted. Receive only; simulated signals only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Fleet Broadcast (UHF SATCOM)
Can I decode Fleet Broadcast (UHF SATCOM) with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Fleet Broadcast (UHF SATCOM)?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try Fleet Broadcast (UHF SATCOM) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.