OnAir

Decode Erminaz with an SDR

Erminaz cubesat: 9k6 FSK CCSDS frames.

In the mode list
Erminaz cubesat
GitHub wiki
Mode-Erminaz

What Erminaz is

ERMINAZ cubesat on 435.775 MHz: 9600 bit/s FSK, CCSDS frames with Reed-Solomon.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Erminaz cubesat.

What OnAir shows

ERMINAZ cubesat on 435.775 MHz: 9600 bit/s FSK, CCSDS frames with Reed-Solomon.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir. See also Legal.

Questions about Erminaz

Can I decode Erminaz with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive Erminaz?

Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.

Can I try Erminaz in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.