Decode OneWeb detector with an SDR
OneWeb frame detection, no decoding.
- In the mode list
- Satellite carriers
- GitHub wiki
- Mode-OneWeb detector
What OneWeb detector is
Detects OneWeb's Ku-band downlink by its 1 ms repeating sequence (published reverse engineering; no public specification). Needs an LNB and a dish.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellite carriers.
What OnAir shows
Detects OneWeb's Ku-band downlink by its 1 ms repeating sequence (published reverse engineering; no public specification). Needs an LNB and a dish.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about OneWeb detector
Can I decode OneWeb detector with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive OneWeb detector?
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try OneWeb detector in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.