Decode What satellite is this? with an SDR
Names an unknown satellite carrier from its Doppler curve (mystery satellite hunter).
- In the mode list
- Satellite carriers
- GitHub wiki
- Mode-What satellite is this?
What What satellite is this? is
Follows every carrier in the capture and names the satellite whose predicted Doppler curve fits. Needs orbital elements and your location.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Satellite carriers.
What OnAir shows
Follows every carrier in the capture and names the satellite whose predicted Doppler curve fits. Needs orbital elements and your location.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about What satellite is this?
Can I decode What satellite is this? with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive What satellite is this??
Receiving satellite downlinks is generally legal. Encrypted or spread content is not decoded, and voice codecs that are patented are not shipped with OnAir.
Can I try What satellite is this? in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.