OnAir

Decode DSRC road toll (EN 12253) with an SDR

Road toll beacons: frame structure only.

In the mode list
Road toll, 5.8 GHz

What DSRC road toll (EN 12253) is

5.8 GHz tolling, EN 12253 downlink at 500 kbit/s: frames and their class are counted. Identifying structure only: link identifiers and any content are not shown or saved.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Road toll, 5.8 GHz.

What OnAir shows

5.8 GHz tolling, EN 12253 downlink at 500 kbit/s: frames and their class are counted. Identifying structure only: link identifiers and any content are not shown or saved.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.

Receiving and the law

Receiving and the law. This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live. See also Legal.

Questions about DSRC road toll (EN 12253)

Can I decode DSRC road toll (EN 12253) with an RTL-SDR?

Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.

Is it legal to receive DSRC road toll (EN 12253)?

This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live.

Can I try DSRC road toll (EN 12253) in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.