OnAir

Decode End of train (AAR EOT/HOT) with an SDR

End of train: US freight train telemetry.

In the mode list
Train telemetry, 457.9 MHz

What End of train (AAR EOT/HOT) is

US end-of-train telemetry on 457.9375 MHz and head-of-train commands on 452.9375 MHz: 1200 bit/s AFSK on FM, the AAR frame with its BCH check. Unit number, brake pipe pressure, motion and battery from the end of the train (tested on a real recording). Head-of-train frames are shown only when they use the same frame check; their fields are not decoded. Receive only.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Train telemetry, 457.9 MHz.

What OnAir shows

US end-of-train telemetry on 457.9375 MHz and head-of-train commands on 452.9375 MHz: 1200 bit/s AFSK on FM, the AAR frame with its BCH check. Unit number, brake pipe pressure, motion and battery from the end of the train (tested on a real recording). Head-of-train frames are shown only when they use the same frame check; their fields are not decoded. Receive only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. OnAir only reads the public broadcast information of cells and base stations, and does not decrypt or follow any user traffic. Check the rules where you live. See also Legal.

Questions about End of train (AAR EOT/HOT)

Can I decode End of train (AAR EOT/HOT) with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive End of train (AAR EOT/HOT)?

OnAir only reads the public broadcast information of cells and base stations, and does not decrypt or follow any user traffic. Check the rules where you live.

Can I try End of train (AAR EOT/HOT) in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.