Decode UMTS cells with an SDR
UMTS: 3G cells by primary scrambling code.
- Group
- Cellular & rail
- In the mode list
- Cells, 3G
- GitHub wiki
- Mode-UMTS cells
What UMTS cells is
UMTS (3G) cells in a 5 MHz channel, from the synchronisation channels and the pilot: primary scrambling code, code group, Ec/Io, level and carrier offset. Receive only; the broadcast channel (operator and cell identity) is not decoded.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Cells, 3G.
What OnAir shows
UMTS (3G) cells in a 5 MHz channel, from the synchronisation channels and the pilot: primary scrambling code, code group, Ec/Io, level and carrier offset. Receive only; the broadcast channel (operator and cell identity) is not decoded.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about UMTS cells
Can I decode UMTS cells with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive UMTS cells?
OnAir only reads the public broadcast information of cells and base stations, and does not decrypt or follow any user traffic. Check the rules where you live.
Can I try UMTS cells in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.