Decode CDMA2000 cells with an SDR
CDMA2000: base stations by pilot PN, SID / NID and system time from the Sync Channel.
- Group
- Cellular & rail
- In the mode list
- Cells, CDMA2000
- GitHub wiki
- Mode-CDMA2000 cells
What CDMA2000 cells is
Cdma2000 / IS-95 base stations in a 1.25 MHz channel: every pilot by PN offset (Ec/Io, level, carrier offset) and its Sync Channel Message: system and network identity (SID, NID), pilot PN, protocol revision, system time, leap seconds, local time offset, paging channel rate and frequency. Receive only, public broadcast.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Cells, CDMA2000.
What OnAir shows
cdma2000 / IS-95 base stations in a 1.25 MHz channel: every pilot by PN offset (Ec/Io, level, carrier offset) and its Sync Channel Message: system and network identity (SID, NID), pilot PN, protocol revision, system time, leap seconds, local time offset, paging channel rate and frequency. Receive only, public broadcast.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about CDMA2000 cells
Can I decode CDMA2000 cells with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive CDMA2000 cells?
OnAir only reads the public broadcast information of cells and base stations, and does not decrypt or follow any user traffic. Check the rules where you live.
Can I try CDMA2000 cells in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.