Decode TD-SCDMA cells with an SDR
TD-SCDMA: cells by SYNC-DL code and cell parameter.
- Group
- Cellular & rail
- In the mode list
- Cells, TD-SCDMA
- GitHub wiki
- Mode-TD-SCDMA cells
What TD-SCDMA cells is
TD-SCDMA (3G TDD, 1.28 Mcps) cells in a 1.6 MHz channel: the downlink pilot's SYNC-DL code (code group), the cell parameter (scrambling code and midamble) from time slot 0, the frame parity and P-CCPCH position from the SYNC-DL phases, level and carrier offset. Receive only; the broadcast channel is not decoded.
Frequencies and settings
D2-MAC and D-MAC satellite TV (FM, 27 MHz; 20 Msps sees most of it).
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Cells, TD-SCDMA.
What OnAir shows
Picture (4:3 / 16:9), channel name, digital sound; EuroCrypt detected, not descrambled.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about TD-SCDMA cells
Can I decode TD-SCDMA cells with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive TD-SCDMA cells?
OnAir only reads the public broadcast information of cells and base stations, and does not decrypt or follow any user traffic. Check the rules where you live.
Can I try TD-SCDMA cells in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.