Decode AeroMACS (structure) with an SDR
AeroMACS: airport data link, structure only.
- Group
- Aviation
- In the mode list
- Airport data link, 5 GHz
- GitHub wiki
- Mode-AeroMACS (structure)
What AeroMACS (structure) is
AeroMACS airport data link, 5091 - 5150 MHz, 5 MHz WiMAX-profile OFDM: detected by its cyclic prefix and 5 ms frames. Structure only, nothing is decoded. Needs at least 5.6 Msps.
Frequencies and settings
D2-MAC and D-MAC satellite TV (FM, 27 MHz; 20 Msps sees most of it).
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Airport data link, 5 GHz.
What OnAir shows
Picture (4:3 / 16:9), channel name, digital sound; EuroCrypt detected, not descrambled.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about AeroMACS (structure)
Can I decode AeroMACS (structure) with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive AeroMACS (structure)?
Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.
Can I try AeroMACS (structure) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.