Decode GBAS VDB with an SDR
GBAS VDB: burst structure of satellite landing data.
- Group
- Aviation
- In the mode list
- Landing system data, VHF
- GitHub wiki
- Mode-GBAS VDB
What GBAS VDB is
GBAS VHF data broadcast (108 - 118 MHz) for satellite landing systems. Bursts in 62.5 ms slots and the 10 500 symbol/s line are detected. The message content is not read: the burst format is only in documents that are not public.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Landing system data, VHF.
What OnAir shows
GBAS VHF data broadcast (108 - 118 MHz) for satellite landing systems. Bursts in 62.5 ms slots and the 10 500 symbol/s line are detected. The message content is not read: the burst format is only in documents that are not public.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about GBAS VDB
Can I decode GBAS VDB with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive GBAS VDB?
Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.
Can I try GBAS VDB in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.