Decode eLoran / Loran-C with an SDR
ELoran / Loran-C: 100 kHz hyperbolic navigation pulses, GRI and station arrival times.
- Group
- Aviation
- In the mode list
- Loran-C, 100 kHz
- GitHub wiki
- Mode-eLoran / Loran-C
What eLoran / Loran-C is
Loran-C is the 100 kHz hyperbolic navigation system. OnAir shows the group repetition interval, the master and secondary stations and their arrival times. In development: the eLoran data channel is not decoded.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Loran-C, 100 kHz.
What OnAir shows
Loran-C at 100 kHz: the group repetition interval, the master and secondary stations with their arrival times relative to the master, level and phase code, and the chain that uses the GRI (Loran-C chains and the Russian Chayka chains, which send the same 100 kHz pulse groups). The eLoran data channel (9th pulse, Eurofix) is not decoded: the Reed-Solomon constants and message layouts of the Loran Data Channel standard are not public text. Receive only, needs a radio or downconverter that tunes to 100 kHz at 250 ksps or more.
Limits and what it was checked with
In development: tested on generated signals with simulated noise only, never on the air. Recordings welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about eLoran / Loran-C
Can I decode eLoran / Loran-C with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive eLoran / Loran-C?
Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.
Can I try eLoran / Loran-C in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.