Decode LDACS (structure) with an SDR
LDACS: L-band data link, structure only.
- Group
- Aviation
- In the mode list
- Data link, L band
- GitHub wiki
- Mode-LDACS (structure)
What LDACS (structure) is
LDACS L-band digital aeronautical link, 625 kHz OFDM: detected by its cyclic prefix (symbol period, prefix, carrier offset). Structure only, nothing is decoded.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Data link, L band.
What OnAir shows
LDACS L-band digital aeronautical link, 625 kHz OFDM: detected by its cyclic prefix (symbol period, prefix, carrier offset). Structure only, nothing is decoded.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about LDACS (structure)
Can I decode LDACS (structure) with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive LDACS (structure)?
Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.
Can I try LDACS (structure) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.