OnAir

Decode DME with an SDR

DME: distance measuring equipment beacons, pulse pairs and ident.

In the mode list
DME, 962-1213 MHz
GitHub wiki
Mode-DME

What DME is

Distance measuring equipment (962 to 1213 MHz) answers aircraft interrogations with pulse pairs. OnAir shows the X or Y channel of a beacon, the pair rate and the Morse ident. In development.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is DME, 962-1213 MHz.

What OnAir shows

DME (distance measuring equipment) on 962-1213 MHz: the channel (number from the tuned frequency, X or Y from the pulse spacing: 12 us, 30 us reply, 36 us interrogation) of the beacon from its pulse pairs, the pair rate and the Morse ident, found as a regular 1350 pairs per second train; on a TACAN beacon also the radial, from the 15 and 135 Hz modulation and the reference bursts; receive only (the slant range needs an interrogation, which OnAir does not send), needs a radio that tunes to about 1 GHz at 2 Msps or more.

Limits and what it was checked with

In development: tested on generated signals with simulated noise only, never on the air. Recordings welcome.

Which radio you need

This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.

Receiving and the law

Receiving and the law. Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live. See also Legal.

Questions about DME

Can I decode DME with an RTL-SDR?

Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.

Is it legal to receive DME?

Receiving aircraft broadcasts is legal in many countries, but some restrict listening to or using what you hear. OnAir is a receiver. Check the rules where you live.

Can I try DME in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.