OnAir

Decode Bluetooth Classic with an SDR

Bluetooth Classic: devices and piconets by LAP, discoverable devices with address and class of device (receive only).

In the mode list
IoT, 2.4 GHz

What Bluetooth Classic is

Bluetooth Classic (BR/EDR) discovery over a wide capture of the 2.4 GHz band: every packet starts with the sync word of its piconet master's LAP, so devices and piconets in use are listed by LAP; a discoverable device that answers an inquiry also gives its full address and class of device. The radio hops over 79 channels of 1 MHz, so a HackRF at 20 Msps hears about a quarter of the packets.….

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is IoT, 2.4 GHz.

What OnAir shows

Bluetooth Classic (BR/EDR) discovery over a wide capture of the 2.4 GHz band: every packet starts with the sync word of its piconet master's LAP, so devices and piconets in use are listed by LAP; a discoverable device that answers an inquiry also gives its full address and class of device. The radio hops over 79 channels of 1 MHz, so a HackRF at 20 Msps hears about a quarter of the packets. Receive only: never inquires, pages or answers; payloads are not decoded.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.

Receiving and the law

Receiving and the law. This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live. See also Legal.

Questions about Bluetooth Classic

Can I decode Bluetooth Classic with an RTL-SDR?

Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.

Is it legal to receive Bluetooth Classic?

This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live.

Can I try Bluetooth Classic in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.