Decode Sub-GHz sensors with an SDR
Sub-GHz sensors: the rtl_433 decoders with a live sensor list, history, export and an unknown signal analyser (RTL-SDR or HackRF at 250 kHz and up).
- Group
- IoT & sensors
- In the mode list
- Sensors, 433.92 MHz
- GitHub wiki
- Mode-Sub-GHz sensors
What Sub-GHz sensors is
Sensors on 433.92 MHz (also 315, 868 and 915 MHz) with the decoders of rtl_433: weather stations, thermometers, tyre pressure, door and smoke sensors, meters, remotes. OOK / ASK and FSK pulse slicer, a live list with history graphs, CSV / JSON / MQTT-style export, and an analyser that shows the pulses and bits of a signal nobody decodes and saves a custom (flex) decoder for it. Which sensors are….
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Sensors, 433.92 MHz.
What OnAir shows
Sensors on 433.92 MHz (also 315, 868 and 915 MHz) with the decoders of rtl_433: weather stations, thermometers, tyre pressure, door and smoke sensors, meters, remotes. OOK / ASK and FSK pulse slicer, a live list with history graphs, CSV / JSON / MQTT-style export, and an analyser that shows the pulses and bits of a signal nobody decodes and saves a custom (flex) decoder for it. Which sensors are supported is listed in docs/SENSORS-3.7.md; not every sensor on the air is covered.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Sub-GHz sensors
Can I decode Sub-GHz sensors with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Sub-GHz sensors?
This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live.
Can I try Sub-GHz sensors in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.