Decode 802.11p V2X (ITS-G5, DSRC) with an SDR
802.11p: vehicle safety messages on 5.9 GHz.
- Group
- IoT & sensors
- In the mode list
- Vehicle safety, 5.9 GHz
- GitHub wiki
- Mode-802.11p V2X (ITS-G5, DSRC)
What 802.11p V2X (ITS-G5, DSRC) is
Vehicle safety messages on 5.9 GHz, 802.11p 10 MHz channels at 3 and 6 Mbit/s: BSM (SAE J2735) and CAM (ETSI) positions in a table and on a map. Needs at least 10 Msps. Receive only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Vehicle safety, 5.9 GHz.
What OnAir shows
Vehicle safety messages on 5.9 GHz, 802.11p 10 MHz channels at 3 and 6 Mbit/s: BSM (SAE J2735) and CAM (ETSI) positions in a table and on a map. Needs at least 10 Msps. Receive only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This mode sits at a high frequency, so check that your radio tunes it: a HackRF covers 1 MHz to 6 GHz, and RTL-SDR stops near 1.7 GHz. Some modes at these frequencies also need a fast radio (10 to 20 Msps) or a dish and an LNB.
Receiving and the law
Questions about 802.11p V2X (ITS-G5, DSRC)
Can I decode 802.11p V2X (ITS-G5, DSRC) with an RTL-SDR?
Probably not: an RTL-SDR tunes up to about 1.7 GHz. A HackRF (1 MHz to 6 GHz) or another wideband radio is the usual choice for this frequency range.
Is it legal to receive 802.11p V2X (ITS-G5, DSRC)?
This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live.
Can I try 802.11p V2X (ITS-G5, DSRC) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.