Decode wfb-ng / OpenHD with an SDR
Wfb-ng / OpenHD: open digital video links for drones (Wi-Fi radios in monitor mode). Receive only. 20 Msps. Video stays encrypted, structure only.
- Group
- IoT & sensors
- Start frequency
- 5805 MHz
- In the mode list
- Video link, structure only
- GitHub wiki
- Mode-wfb-ng / OpenHD
What wfb-ng / OpenHD is
Wfb-ng and OpenHD digital video links: 802.11n frames injected in monitor mode, MCS 0 - 7 at 20 MHz. Link and port, FEC block numbers, frames lost; the video stays encrypted.
Frequencies and settings
| Start frequency | 5805 MHz |
|---|
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Video link, structure only.
What OnAir shows
wfb-ng and OpenHD digital video links: 802.11n frames injected in monitor mode, MCS 0 - 7 at 20 MHz. Link and port, FEC block numbers, frames lost; the video stays encrypted.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about wfb-ng / OpenHD
Can I decode wfb-ng / OpenHD with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive wfb-ng / OpenHD?
This mode is passive. It only receives, never connects, pairs or joins networks, and never decrypts payloads. Check the rules where you live.
Can I try wfb-ng / OpenHD in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.