Decode Robust Packet (RPR, needs a user test) with an SDR
Robust Packet: HF AX.25 packet, 8 OFDM carriers, speed level and bursts (physical layer only, needs a recording).
- Group
- HF utility
- In the mode list
- HF packet, OFDM
- GitHub wiki
- Mode-Robust Packet (RPR, needs a user test)
What Robust Packet (RPR, needs a user test) is
Robust Packet (RPR, SCS), receive only, physical layer: eight OFDM carriers 60 Hz apart around 1500 Hz (500 Hz wide), 50 baud, D-BPSK (speed level 1, code rate 1/2) or D-QPSK (level 2, rate 3/4), upper sideband, usually 10147.3 kHz. Finds the carrier comb, the bursts, the symbol clock and the speed level and shows the demodulated symbols. The convolutional code polynomials, the interleaver, the….
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is HF packet, OFDM.
What OnAir shows
Robust Packet (RPR, SCS), receive only, physical layer: eight OFDM carriers 60 Hz apart around 1500 Hz (500 Hz wide), 50 baud, D-BPSK (speed level 1, code rate 1/2) or D-QPSK (level 2, rate 3/4), upper sideband, usually 10147.3 kHz. Finds the carrier comb, the bursts, the symbol clock and the speed level and shows the demodulated symbols. The convolutional code polynomials, the interleaver, the scrambler, the callsign compression and the packet types are not public, so no AX.25 frames or text are produced yet: needs a recording (and a user test: no real signal was available).
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about Robust Packet (RPR, needs a user test)
Can I decode Robust Packet (RPR, needs a user test) with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive Robust Packet (RPR, needs a user test)?
Some HF utility traffic belongs to governments or the military. Receiving is legal in many countries, but rules differ. Check them where you live.
Can I try Robust Packet (RPR, needs a user test) in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.