Decode CIS OFDM HDR with an SDR
CIS OFDM HDR (CIS-45 / 60 / 93): identification only (simulated only).
- Group
- HF utility
- In the mode list
- Identification only, HF
- GitHub wiki
- Mode-CIS OFDM HDR
What CIS OFDM HDR is
CIS OFDM HDR modem (CIS-45, CIS-60, CIS-93), identification only: the OFDM symbol (useful part, guard, rate), the carrier count and the PSK order are measured and the variant named. No frame format is published. Simulated signals only so far.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Identification only, HF.
What OnAir shows
CIS OFDM HDR modem (CIS-45, CIS-60, CIS-93), identification only: the OFDM symbol (useful part, guard, rate), the carrier count and the PSK order are measured and the variant named. No frame format is published. Simulated signals only so far.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about CIS OFDM HDR
Can I decode CIS OFDM HDR with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive CIS OFDM HDR?
Some HF utility traffic belongs to governments or the military. Receiving is legal in many countries, but rules differ. Check them where you live.
Can I try CIS OFDM HDR in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.