Decode QRSS grabber with an SDR
QRSS: very slow Morse read from a spectrogram, receive only.
- Group
- Amateur: digital
- In the mode list
- Slow CW, 10.140 MHz
- GitHub wiki
- Mode-QRSS grabber
What QRSS grabber is
QRSS slow Morse (dots of 1 to 120 s): a spectrogram of the narrow window around the keyed tone and the text read from it. The tone and the element length are found automatically; both can be set under Advanced.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Slow CW, 10.140 MHz.
What OnAir shows
QRSS slow Morse (dots of 1 to 120 s): a spectrogram of the narrow window around the keyed tone and the text read from it. The tone and the element length are found automatically; both can be set under Advanced.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about QRSS grabber
Can I decode QRSS grabber with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive QRSS grabber?
Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.
Can I try QRSS grabber in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.