Decode JT6M with an SDR
JT6M: 6 m meteor and ionospheric scatter, 44-tone FSK, receive only.
- Group
- Amateur: digital
- In the mode list
- 6 m scatter, 50.230 MHz
- GitHub wiki
- Mode-JT6M
What JT6M is
JT6M 6 m scatter (44 tones 21.5 Hz apart from 1076.66 Hz, 21.5 baud, a sync tone every third symbol): finds the pings, the tuning error and the frame timing, lists the characters of each ping and folds a long signal into its repeating message.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is 6 m scatter, 50.230 MHz.
What OnAir shows
JT6M 6 m scatter (44 tones 21.5 Hz apart from 1076.66 Hz, 21.5 baud, a sync tone every third symbol): finds the pings, the tuning error and the frame timing, lists the characters of each ping and folds a long signal into its repeating message.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about JT6M
Can I decode JT6M with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive JT6M?
Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.
Can I try JT6M in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.