OnAir

Decode ISCAT with an SDR

ISCAT: 42-tone scatter mode, A and B found automatically, receive only.

In the mode list
Scatter, 144.140 MHz
GitHub wiki
Mode-ISCAT

What ISCAT is

ISCAT-A and ISCAT-B (WSJT, 42 tones, 24-symbol frames with Costas sync and length symbols) for scatter and aircraft scatter: variant, tuning error and message are found automatically.

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Scatter, 144.140 MHz.

What OnAir shows

ISCAT-A and ISCAT-B (WSJT, 42 tones, 24-symbol frames with Costas sync and length symbols) for scatter and aircraft scatter: variant, tuning error and message are found automatically.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit. See also Legal.

Questions about ISCAT

Can I decode ISCAT with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive ISCAT?

Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.

Can I try ISCAT in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.