Decode CP16 with an SDR
CP16: Chinese characters drawn on the waterfall by 16 carriers (CRAC).
- Group
- Amateur: digital
- In the mode list
- Waterfall text, HF
- GitHub wiki
- Mode-CP16
What CP16 is
CP16, the Chinese Radio Amateurs Club picture text: 16 carriers 10 to 20 Hz apart keyed by 16 x 16 dot characters, read on a waterfall (1 to 4 s a character, GB2312). Finds the carriers and the rows by itself on either sideband, shows the picture and reads the characters against the font. Receive and send.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Waterfall text, HF.
What OnAir shows
CP16, the Chinese Radio Amateurs Club picture text: 16 carriers 10 to 20 Hz apart keyed by 16 x 16 dot characters, read on a waterfall (1 to 4 s a character, GB2312). Finds the carriers and the rows by itself on either sideband, shows the picture and reads the characters against the font. Receive and send.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about CP16
Can I decode CP16 with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive CP16?
Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.
Can I try CP16 in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.