OnAir

Decode Aurora / Es / TEP beacons with an SDR

Beacon events: openings of a VHF beacon logged with time, S/N, Doppler width and a character class (aurora / TEP / sporadic-E like).

In the mode list
Beacon openings, VHF

What Aurora / Es / TEP beacons is

Beacon event log for VHF and up: a carrier at the tuned frequency is followed in a +-1 kHz window and every opening is logged with start, duration, peak S/N, Doppler width and shift, and flutter. The kind is named by the signal's character only: a Doppler-spread signal as aurora-like, a fluttering carrier as TEP or scatter-like, a steady carrier as sporadic-E-like; the path itself is not proven.….

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Beacon openings, VHF.

What OnAir shows

Beacon event log for VHF and up: a carrier at the tuned frequency is followed in a +-1 kHz window and every opening is logged with start, duration, peak S/N, Doppler width and shift, and flutter. The kind is named by the signal's character only: a Doppler-spread signal as aurora-like, a fluttering carrier as TEP or scatter-like, a steady carrier as sporadic-E-like; the path itself is not proven. A spectrogram, an hourly count and CSV. Receive only. Tested on simulated signals only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.

Receiving and the law

Receiving and the law. Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit. See also Legal.

Questions about Aurora / Es / TEP beacons

Can I decode Aurora / Es / TEP beacons with an RTL-SDR?

An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.

Is it legal to receive Aurora / Es / TEP beacons?

Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.

Can I try Aurora / Es / TEP beacons in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.