OnAirDecode THOR with an SDR
THOR: robust keyboard text.
- Group
- Amateur: digital
- Start frequency
- 14.077 MHz
- In the mode list
- Keyboard, 14.077 MHz
What THOR is
THOR is a keyboard-to-keyboard digital mode from the fldigi family.
Frequencies and settings
| Start frequency | 14.077 MHz |
|---|---|
| Tuning range of the mode table | 1 to 30 MHz |
| Sample rate asked | 2 Msps |
| Lowest working rate | 250 ksps |
| Channel width | 3 kHz |
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Keyboard, 14.077 MHz.
What OnAir shows
THOR keyboard modes (4 to 100) with incremental frequency keying and FEC, 14.077 MHz.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
This is a shortwave mode, so the radio has to tune HF. An SDRplay, Airspy HF+ or an RTL-SDR in direct-sampling mode do that directly; with a HackRF an HF upconverter or a direct-sampling receiver is the usual route. A long wire or loop antenna matters more than the radio.
Receiving and the law
Questions about THOR
Can I decode THOR with an RTL-SDR?
An RTL-SDR can receive HF only in direct-sampling mode, which OnAir offers in its radio settings; results depend on the antenna. SDRplay and Airspy HF+ radios are better suited.
Is it legal to receive THOR?
Amateur radio signals are meant to be received. Receiving needs no licence in most countries; OnAir does not transmit.
Can I try THOR in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.