OnAir

Decode Occupied bandwidth meter with an SDR

Occupied bandwidth: 99 %, x dB, centre, adjacent power.

In the mode list
Event

What Occupied bandwidth meter is

Occupied bandwidth meter (ITU-R SM.328): for the strongest signal of a wide capture, the 99 % occupied bandwidth, the bandwidths at 3, 6, 20 and 26 dB below the peak, the centre against the tuned frequency, the signal to noise ratio and the adjacent and alternate power (dB under the signal, bands as wide as the signal at 1.25 and 2.5 bandwidths). What arrives at this radio, noise and neighbours….

Frequencies and settings

OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Event.

What OnAir shows

Occupied bandwidth meter (ITU-R SM.328): for the strongest signal of a wide capture, the 99 % occupied bandwidth, the bandwidths at 3, 6, 20 and 26 dB below the peak, the centre against the tuned frequency, the signal to noise ratio and the adjacent and alternate power (dB under the signal, bands as wide as the signal at 1.25 and 2.5 bandwidths). What arrives at this radio, noise and neighbours included. Simulated signals only.

Limits and what it was checked with

Checked with generated signals and impairments; recordings of real signals welcome.

Which radio you need

Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.

Receiving and the law

Receiving and the law. These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for. See also Legal.

Questions about Occupied bandwidth meter

Can I decode Occupied bandwidth meter with an RTL-SDR?

Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.

Is it legal to receive Occupied bandwidth meter?

These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for.

Can I try Occupied bandwidth meter in OnAir without a radio?

Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.