Decode Carrier frequency accuracy meter with an SDR
Frequency meter: offset, ppm, drift, Allan deviation.
- Group
- General & tools
- In the mode list
- Event
- GitHub wiki
- Mode-Carrier frequency accuracy meter
What Carrier frequency accuracy meter is
Carrier frequency accuracy meter: tune a carrier of a known frequency (a time-signal or broadcast station, a GPS-locked beacon) and read the radio's error in Hz and parts per million, its drift in ppm per hour, the Allan deviation from 1 to 32 s, and steps or loss of the carrier. The reading is the radio's error plus the transmitter's. Simulated signals only.
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Event.
What OnAir shows
Carrier frequency accuracy meter: tune a carrier of a known frequency (a time-signal or broadcast station, a GPS-locked beacon) and read the radio's error in Hz and parts per million, its drift in ppm per hour, the Allan deviation from 1 to 32 s, and steps or loss of the carrier. The reading is the radio's error plus the transmitter's. Simulated signals only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Carrier frequency accuracy meter
Can I decode Carrier frequency accuracy meter with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Carrier frequency accuracy meter?
These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for.
Can I try Carrier frequency accuracy meter in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.