Decode Crest factor (PAPR / CCDF) meter with an SDR
PAPR: crest factor and CCDF against Gaussian.
- Group
- General & tools
- In the mode list
- Event
- GitHub wiki
- Mode-Crest factor (PAPR / CCDF) meter
What Crest factor (PAPR / CCDF) meter is
Crest factor meter: the distribution of the instantaneous power of the captured signal against its mean: crest factor, and the levels exceeded 10, 1, 0.1 and 0.01 % of the time (CCDF), with Gaussian theory beside them (3.6, 6.6, 8.4, 9.6 dB) to tell OFDM or multi-carrier (Gaussian), single-carrier PSK, constant-envelope FM or FSK, clipped or impulsive signals. Includes the radio's own noise and….
Frequencies and settings
OnAir takes any frequency you type; the numbers above are the mode's starting point and the range its table describes. In the app the shortcut label is Event.
What OnAir shows
Crest factor meter: the distribution of the instantaneous power of the captured signal against its mean: crest factor, and the levels exceeded 10, 1, 0.1 and 0.01 % of the time (CCDF), with Gaussian theory beside them (3.6, 6.6, 8.4, 9.6 dB) to tell OFDM or multi-carrier (Gaussian), single-carrier PSK, constant-envelope FM or FSK, clipped or impulsive signals. Includes the radio's own noise and limits. Simulated signals only.
Limits and what it was checked with
Checked with generated signals and impairments; recordings of real signals welcome.
Which radio you need
Any radio that tunes this range works. An RTL-SDR covers roughly 24 MHz to 1.7 GHz, and every other radio in the radio guide reaches it too. Antenna height and a clear view of the transmitter matter most.
Receiving and the law
Questions about Crest factor (PAPR / CCDF) meter
Can I decode Crest factor (PAPR / CCDF) meter with an RTL-SDR?
Usually yes for narrowband signals, as an RTL-SDR tunes roughly 24 MHz to 1.7 GHz at up to about 2.4 Msps. Wide signals such as TV channels need a faster radio, and OnAir says next to the source what the selected radio can do.
Is it legal to receive Crest factor (PAPR / CCDF) meter?
These tools only look at the spectrum and listen. Receiving is legal in most countries, but laws differ on what you may use the content for.
Can I try Crest factor (PAPR / CCDF) meter in OnAir without a radio?
Yes. Most modes include a built-in synthetic test signal, so you can open the screen and try the controls before you own a radio.